McAfee FIREWALL 2.10 Guide de l'utilisateur télécharger pdf (Page 52)

• Action — Allow • Select UDP, Local, then type the Port No

as 68

• Direction — Outgoing • Select UDP, Remote, then type the Port

No as 67

Create a rule to allow DNS queries

• Rule Name — Type a name for the rule • Network Protocol (IPv4) — Not applicable

• Status — Enabled • Transport Protocol — Select Protocol

• Action — Allow • Select UDP, Remote, then type the Port

No as 53

• Direction — Outgoing

Create a rule to allow access to websites

• Rule Name — Type a name for the rule • Network Protocol (IPv4) — Not applicable.

• Status — Enabled • Transport Protocol — Select Protocol

• Action — Allow • Select TCP, Remote, then type the Port

No as 80

• Direction — Outgoing

Allow specific remote IP address and port access

• Rule Name — Type a name for the rule

• Status — Enabled

• Action — Allow

• Direction — Outgoing

• In Network Protocol (IPv4), select Remote | Subnet, then type the Subnet Mask value

• Transport Protocol — Select Protocol

• Select TCP, Remote, then type the Port No

You can type a single port number, or series of port numbers using a comma, or a range of

ports using a hyphen.

Recommended firewall rules

In addition to the default firewall rules, we recommend that you configure these rules:

• Allow bi-directional NTP port 123 to 123

• Allow bi-directional NetBIOS name service port 137 to 137

• Allow outgoing FTP client port 1024-65535 to 21

Configuring protection preferences on a standalone Mac

Desktop firewall

McAfee Endpoint Protection for Mac 2.1.0 Product Guide

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 74 75

Pas de commentaire

McAfee FIREWALL 2.10 Guide de l'utilisateur Page 52